Deda Elementi WD30ALCL User Manual page 18

CLEANING, MAINTENANCE AND REPLACEMENT PARTS
The wheels you have just purchased are high technolgy products that require
specific care and maintenance to fully obtain the maximum performance
advantages and to preserve them over time. So we recommend to follow simple
rules of use to avoid any kind of problem.
WARNING: Never clean the wheels and parts using high pressure and high
temperature water. The water pressure can overcome seals and bearings
protections systems causing damages irreparably or malfunfion of internal parts
of the hub. Never use solvents, chemicl products, petrol or similar substances,
over the hubs that can damage seals and rubber gaskets or remove the grease
from the bearings completely.
After the bicycle washing, dry every parts and components avoiding to store water
into the hollow points of the wheel ( for instance inside the rim and hub).
Frequently check the wear status od the wheels parts and if necessary make the
maintenance and/or parts replacement through the official Deda Elementi dealers.
The recommended service intervals depend on the use and using condition of
the wheels. It is recommended to make an inspection after each riding season or
every time in case of bearing problems, wheel out of center or damaged parts are
apparent. Since specific tools and experience are necessary for hub maintenance,
wheel trueing or parts replacement it is recommended that the service should be
done by official Deda Elementi dealer.
For any service or replacement parts, only orginal Deda Elementi spare parts have
to be used in order to guarantee the product quality and the warranty maintaining.
18