Advertisement
Available languages
Available languages
WD30ALCL wheels are designed to use clincher tires with inner tubes only. Check
tires and inner tubes dimensions according to the rim technical specifications
included in this user's manual.
WARNING: Do not use tubular or tubeless tires with this wheel. The use of non
compatible tires with this wheel can cause sudden and unexpected loss of
pressure, loss of control and tire failure resulting in serious accident and injury
for the user.
Before the tire installation check that rim tape is already installed in the right
position inside the rim; if not please install first the rim tape.
Make sure the rim tape cover all the rim bed holes along the entire
circumference of the wheel.
The valve hole on the rim tape has to be placed at the same position of the
valve hole of the rim wheel (Fig. 1).
Install the tire on the wheel and proceede with tire inflation as per tire
manufacturer recommandations.
Fig.1
WARNING: Never exceed the maximum inflation pressure recommended by
the wheels manufacturer as indicated in this user's manual. Excessive tire
pressures could damage the rim structure resulting in serious accident and
injury for the user.
WARNING: Tire installation requires a specific experience of the product, in case
of doubts please contact an official Deda Elementi dealer or a qualified bicycle
technician. During tire installation don't use tools or tire lever that can fold,
damage or fragilize the rim edge. An incorrect tire installation can cause serious
accidents and injury for the user.
TIRES
15
Advertisement
