Advertisement
Available languages
Available languages
Close the quick release lever from the Open to the Closed position; if necessary
adjust the closing force manually through the nut (tightening the force
increases, untightening the force decreases) (Fig. 2).
Fig.2
WARNING: Since specific experience is necessary for proper wheels installation,
in case of doubts it is recommended that the product be installed by an official
Deda Elementi dealer or a qualified bicycle technician. An incorrect wheels
installation can cause serious accidents and injury for the user.
WARNING: While adjusting the closing force manually, please make sure do
not tighten or untighten the nut too much. A ½ turn of rotation can result in
the non closing of the wheel or excessive closing force of the wheel. The
improper adjusting of the wheel closing can cause serious accidents and
injury for the user.
When the lever is
closed, make sure it
is completly closed
(full travel) and do not
allow the frame or fork
to inhibit the complete
closing of the lever
(Fig. 3).
Check before every ride the closing force of the wheel and correct mechanism
functioning of quick releases.
WARNING: After cleaning the bicycle or a ride in rain conditions, please
lubricate pivot and cam points in order to prevent oxidation phenomenons that
damage the correct mechanism functioning of quick releases.
Fig.3
OK
NO
17
Advertisement
