ISSUE 3.0
8.
Connect the VOIPDB-C1 to an Switching hub using an LAN Cable.
The LAN Cable must pass two times (two rounds) through the Ferrite Core as below. (Ferrite
Core is attached with VOIPDB-C1)
VOIPDB-C1 board (CN1)
9.
Refer to the SL Programming Manual for detailed programming instructions.
The VoIP feature requires system configuration.
For the details of setting and operation, refer to the SL Features & Specifications Manual
(separate issue).
4.2.4 LED Indication
LED indications for the IP4WW-VOIPDB-C1 are listed
page
2-68. Each LED is listed with its associated function and operational status.
Hardware Manual
< Bottom View >
Figure 2-96 Connecting a LAN Cable
< Bottom View >
Figure 2-97 Location of LEDs
LAN Cable
Ferrite Core
Pass 2 times
to HUB
Table 2-19 VOIPDB LED Indications on
VOIPDB-C1
board
LINK10
LINK100
LINK1000
ACT
SL1000
30 - 50 mm
(1.181 - 1.967)
2-67