Figure 2-66 Mounting The 2Nd Expansion Interface Card - NEC SL1000 Hardware Manual

ISSUE 3.0
5. In case a 2nd PCB is mounted, insert two Nylon-spacers into the specified holes, and fasten two
Metal-spacers into the specified holes. (Both Nylon and Metal spacers are provided with 408E/
008E/000E/1PRIU)
If no more Expansion interface card is mounted on the 2nd PCB, fasten two screws to secure the
2nd PCB to the top of the 408E/008E/000E/1PRIU.
Expansion Interface Card
(2nd PCB)
Nylon-Spacers
Expansion Interface Card
(1st PCB)
Hardware Manual
J1
J2

Figure 2-66 Mounting the 2nd Expansion Interface Card

Screws
Screw position
2nd EXP.
PCB
Both sides are
the same.
Metal-Spacers
SL1000
2-45