Voip Card (Voipdb-C1); General; Unpacking; Installing The Voipdb-C1 Pcb - NEC SL1000 Hardware Manual

ISSUE 3.0
7. Replace the Main-Cover and fasten two screws.
Main-Cover
Hooks

4.2 VoIP Card (VOIPDB-C1)

(This item is for V1.2 or higher)

4.2.1 General

The IP4WW-VOIPDB-C1 daughter board is used to convert the RTP (Real Time Transfer Protocol)
packets via the IP Network and PCM highway. The daughter board is installed on the CPU card.

4.2.2 Unpacking

Items
IP4WW-VOIPDB-C1

4.2.3 Installing the VOIPDB-C1 PCB

• Do not remove or install the CPU Card with the power on.
• If Expansion KSU(s) are installed, turn the power on/off in the order of
Expansion 3 KSU, Expansion 2 KSU, Expansion 1 KSU and then Main
KSU.
1. Turn off the system power and disconnect AC cord.
Hardware Manual

Figure 2-89 Replacing the Main-Cover

Table 2-18 VOIPDB-C1 Packing List

List of Contents
IP4WW-VOIPDB-C1
Ferrite Core (for Ethernet Cable)
Two screws
SL1000
QTY
1
1
2-63