ISSUE 3.0
3.
Adjust the leg to desired height.
4.
Lead the Line cord through the applicable grooves.
(Refer to
Figure 2-118 Cabling of DSS on page
5.3.2 Wall-Mounting the DSS Console
1.
Lift the leg and lead the cable through the applicable grooves. Refer to
Wall-Mount on page
Hardware Manual
Leg
Figure 2-120 High Position Setting
2-81. Lower leg to stowed position.
Leg
Figure 2-121 Cabling for Wall-Mount
< High position >
2-80)
< Bottom view>
SL1000
Figure 2-121 Cabling for
2-81