Figure 3-13 Inserting The Cf Card; Figure 3-14 Prg90-04 Display; Figure 3-15 Next Prg Display - NEC SL1000 Hardware Manual

SL1000
1. Turn the power off, insert the Customer Data CF card into the CF Slot on PZ-VM21.
CF card
2. Turn the power on, enter the Program Mode then PRG90-04.
Program Mode
3. Dial 1 and press Hold key.
4. When the data backup to the CF card is completed, the display changes to the next PRG.
90-04-01
Loading Data
5. Remove the CF card and exit from the Program Mode.
3-6

Figure 3-13 Inserting the CF card

Figure 3-14 PRG90-04 Display

Figure 3-15 Next PRG Display

CPU card
CF Slot (CN2)
PZ-VM21 PCB
90-04-01
Data Load
,
90-05- M tenanc
Slot Control
ISSUE 3.0
System Start Up