Replacing The Lithium Battery; Figure 4-6 Removing The Sub-Cover; Figure 4-7 Disconnecting The Ac Power Cord - NEC SL1000 Hardware Manual

ISSUE 3.0

2.3 Replacing the Lithium Battery

1. Remove the Sub-Cover at the Main KSU.
2. Power off the system, and remove the AC plug from the AC outlet.
3. Disconnect the AC power cord from the KSU.
AC power cord must be disconnected, otherwise the Main-Cover cannot be
opened.
Hardware Manual
Sub-Cover
Tab

Figure 4-6 Removing the Sub-Cover

Disconnect
AC Power Cord

Figure 4-7 Disconnecting the AC Power Cord

Tab
SL1000
4-5