Figure 2-67 Mounting The 3Rd Expansion Interface Card; Figure 2-68 Mounting Three Expansion Interface Cards - NEC SL1000 Hardware Manual

SL1000
6. In case a 3rd PCB is mounted, insert two Nylon-spacers into the specified holes, and fasten two
Metal-spacers into the specified holes. (Both Nylon and Metal spacers are provided with 408E/
008E/000E/1PRIU)
Fasten two screws to secure the 3rd PCB to the top of the 408E/008E/000E/1PRIU.
Expansion Interface Card
(3rd PCB)
Nylon-Spacers
Expansion Interface Card
(2nd PCB)
7. Following illustration shows an example for installing 3 expansion PCBs onto the KSU.
3rd PCB
2nd PCB
1st PCB
2-46
J2
J1
J2
J1
J2

Figure 2-67 Mounting the 3rd Expansion Interface Card

Figure 2-68 Mounting Three Expansion Interface Cards

ISSUE 3.0
Screws
Screw position
EXP.3rd
PCB
Both sides are
the same.
Metal-
Spacers
Installation