Applying Power To The Ip Multiline Telephone; Installing The Dss Console; Dss Console Leg Adjustment; Figure 2-117 Low Position Setting - NEC SL1000 Hardware Manual

ISSUE 3.0

5.2.3 Applying Power to the IP Multiline Telephone

IP Multiline Telephone (IP4WW-24TIXH-C1) supports two different power sources for the Telephone.
• AC-LE UNIT
Plug the Optional AC-[ ] AC adapter input jack in the telephone base unit, and plug the 2-prong wall
plug of the AC adapter in AC outlet.
• PoE(IEEE802.3af)
PoE (Power Over Ethernet) is a LAN technology that allows standard 10Base-T/100Base-TX data
cables to pass electrical current from a power source to a requesting end device.

5.3 Installing the DSS Console

The 60D DSS-A Console can be installed on the last hybrid extension ports (ST8/ST16/ST24) of each
408M-A1/408E-A1/008M-A1 card directly. The pair extension for the DSS Console is assigned using
system programming.

5.3.1 DSS Console Leg Adjustment

The DSS Console provides the leg for angling the console to best suit each user. The leg can be set
for two different heights (Low/High).
5.3.1.1 Low Position Setting
1. Turn DSS Console over (button side down).
2. Adjust the legs to desired height.
Hardware Manual
Leg

Figure 2-117 Low Position Setting

< Low position >
SL1000
2-79