Installing The Expansion Ksu(S); General; Unpacking (Exifb-C1); Connectors Location (Exifb-C1) - NEC SL1000 Hardware Manual

ISSUE 3.0

1.4 Installing the Expansion KSU(s)

1.4.1 General

Each Expansion KSU is connected to the Main KSU individually. The EXIFB-C1 card and the
MEMDB-C1 card must be installed in the Main KSU (1632M-A) . (Refer to
Memory Card (MEMDB-C1) on page 2-60

1.4.2 Unpacking (EXIFB-C1)

Unpack the EXIFB-C1 and check it against physical damage.
Items
EXIFB-C1

1.4.3 Connectors Location (EXIFB-C1)

J1
J2
J3
No.
J1 Expansion Connector
J2 Expansion Connector
J3 Expansion Connector
J4 Mother PCB
J5, J6 Debug Purpose (Not used)

1.4.4 Installing the EXIFB-C1 PCB

Do Not Power on until all installations have been completed.
1. Turn off the system power and disconnect the AC cord from KSU.
Hardware Manual
for MEMDB-C1 card)

Table 2-3 EXIFB-C1 Packing List

List of Contents
EXIFB-C1 PCB
J5

Figure 2-11 Connectors of EXIFB-C1

Table 2-4 Connectors of EXIFB-C1

Connectors
Installing the Expansion
QTY
1
J6
J4
Connectable Devices
Expansion KSU 3
Expansion KSU 2
Expansion KSU 1
J1 connector on 408M-A1
-
SL1000
2-9