Figure 2-108 Setting For High Position; Figure 2-109 Leg Setting For High Position - NEC SL1000 Hardware Manual

ISSUE 3.0
5.1.2.2 High position setting
1. Turn telephone over (button side down).
2. Pull up the Leg Stoppers.
3. Adjust the leg to desired height.
Leg
4. Lead the Line and Handset cords through the applicable grooves.
(Refer to Figure 2-107 Cabling of Multiline Telephone on page
Hardware Manual
Leg

Figure 2-108 Setting for High Position

Figure 2-109 Leg Setting for High Position

Leg Stopper
< High position >
2-74)
SL1000
2-75