First Time Setup; Component Video Input Setup; Digital Input Setup - Onkyo HT S3200 Instruction Manual

First Time Setup

Component Video Input Setup

If you connect to a COMPONENT VIDEO IN, you must
assign it to an input selector. For example, if you connect
your DVD/BD player to COMPONENT VIDEO IN 2,
you should assign it to the DVD/BD input selector.
Input selector
DVD/BD
VCR/DVR
CBL/SAT
AUX
TV/TAPE
CD
1
Press the [RECEIVER] button,
followed by the [SETUP] button.
2 Use the Up and Down [ ]/[ ]
buttons to select
"1.Component", and then press
[ENTER].
3 Use the Up and Down [ ]/[ ]
buttons to select an input
selector, and use the Left and
Right [ ]/[ ] buttons to select:
IN1: Select if the video component
IN2: Select if the video component
- - - - -: Select if you're not using the
4 Press the [SETUP] button.
Setup closes.
Note:
This procedure can also be performed on the AV receiver
by using its [SETUP] button, arrow buttons, and
[ENTER] button.
36
Default assignment
IN1
- - - - -
IN2
- - - - -
- - - - -
- - - - -
is connected to
COMPONENT VIDEO IN 1.
is connected to
COMPONENT VIDEO IN 2.
COMPONENT VIDEO
OUT.

Digital Input Setup

To enjoy Dolby Digital and DTS, you must connect your
DVD/BD player to the AV receiver by using a digital
audio connection (coaxial or optical).
Here are the default assignments.
Input selector Default assignment
DVD/BD
VCR/DVR
CBL/SAT
AUX
TV/TAPE
CD
With this function, you can assign digital inputs to input
sources. For example, if you connect your DVD/BD
player to DIGITAL IN OPTICAL 1, you'll need to
assign that input (OPT1) to the DVD input source.
You can change the assignments as follows.
ENTER
SETUP
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
COAX
- - - - -
OPT1
- - - - -
- - - - -
OPT2
RECEIVER