Rear Panel - Onkyo HT S3200 Instruction Manual

Front & Rear Panels—Continued

Rear Panel

DIGITAL IN COAXIAL
These coaxial digital audio inputs are for
connecting components with a coaxial digital audio
output, such as a CD player or DVD/BD player.
They're assignable, which means you can assign
each one to an input selector to suit your setup. See
"Digital Input Setup" on page 36.
DIGITAL IN OPTICAL 1 and 2
These optical digital audio inputs are for connecting
components with an optical digital audio output,
such as a CD player or DVD/BD player. They're
assignable, which means you can assign each one to
an input selector to suit your setup. See "Digital
Input Setup" on page 36.
COMPONENT VIDEO IN 1 and 2
These RCA component video inputs are for
connecting components with a component video
output, such as a DVD/BD player, DVD/BD
recorder, or DVR (digital video recorder). They're
assignable, which means you can assign each one to
an input selector to suit your setup. See
"Component Video Input Setup" on page 36.
COMPONENT VIDEO OUT
This RCA component video output is for
connecting a TV or projector with a component
video input.
HDMI IN 1–3 and OUT
HDMI (High Definition Multimedia Interface)
connections carry digital audio and digital video.
The HDMI inputs are for connecting components
with an HDMI output, such as a DVD/BD player,
DVD/BD recorder, or DVR (digital video recorder).
The HDMI outputs are for connecting a TV or
projector with an HDMI input.
10
AM and FM ANTENNA
The AM push terminals are for connecting an AM
antenna. The FM jack is for connecting an FM
antenna.
MONITOR OUT
The composite video jack should be connected to a
video input on your TV or projector.
FRONT SPEAKERS A, CENTER, and SURR
L/R SPEAKERS & SUBWOOFER
These terminal posts and push terminals are for
connecting speaker set A.
FRONT SPEAKERS B
These push terminals are for connecting speaker set
B.
REMOTE CONTROL
This (Remote Interactive) jack can be
connected to the jack on another
Onkyo component for remote and system control.
To use , you must make an analog audio
connection (RCA) between the AV receiver and the
other component, even if they are connected
digitally.
CD IN
This analog audio input is for connecting a CD
player's analog audio output.
TV/TAPE IN/OUT
These analog audio input and output jacks are for
connecting a recorder with an analog audio input
and output, such as a cassette deck, MD recorder,
etc.
-capable