Table Of Contents; Package Contents; Introduction; Connection - Onkyo HT S3200 Instruction Manual

Contents

Introduction

Important Safety Instructions .................................... 2
Precautions ............................................................... 3
Speaker Precautions................................................. 4
Package Contents..................................................... 5
Features .................................................................... 7
Front & Rear Panels.................................................. 8
Speaker Package.................................................... 12
Remote Controller ................................................... 13
Connections
Enjoying Home Theater .......................................... 15
Connecting the AV receiver .................................... 16
Turning on & First Time Setup
Turning On the AV receiver..................................... 35
First Time Setup...................................................... 36
Basic Operations
Basic Operations..................................................... 38
Listening to the Radio ............................................. 42
Recording................................................................ 46
Using the Listening Modes
Using the Listening Modes...................................... 47
Advanced Setup
Advanced Setup...................................................... 52
Controlling Other Components
Controlling Other Components................................ 60
Others
Troubleshooting ...................................................... 66
Specifications .......................................................... 69
* To reset the AV receiver to its factory defaults, turn it on and,
while holding down the [VCR/DVR] button, press the
[ON/STANDBY] button (see page 66).

Package Contents

Make sure you have the following items:
AV receiver HT-R370
HT-R370
Remote controller and two batteries (AA/R6)
Indoor FM antenna
AM loop antenna
*
In catalogs and on packaging, the letter at the end of the product
name indicates the color. Specifications and operations are the
same regardless of color.
5