First Time Setup - Onkyo HTS590 - 5.1 Channel Component Home Theater Audio System Owner's Manual

First Time Setup

Assigning Digital Inputs to Input
Sources
2, 3
STANDBY/ON
STANDBY
A SPEAKERS B TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
PHONES
MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3
1
To enjoy Dolby Digital and DTS, you must connect your
DVD player to the AV receiver by using a digital audio
connection (coaxial or optical).
Here are the default assignments.
Input selector Default assignment
DVD
VIDEO 1/VCR
VIDEO 2
VIDEO 3
TAPE
CD
With this function, you can assign digital inputs to input
sources. For example, if you connect your DVD player
to DIGITAL IN OPTICAL, you'll need to assign that
input (OPT1) to the DVD input source.
You can change the assignments as follows.
Note:
Make sure you also set your digital sources to send out a
digital signals. Please refer to the digital sources' man-
ual.
1 Press the input selector button
for the source that you want to
DVD VIDEO 1/VCR VIDEO 2
assign.
(Digital inputs cannot be assigned to
VIDEO 3 TAPE TUNER
the TUNER input source.)
CD
2 Press the [DIGITAL INPUT]
button.
DIGITAL INPUT
The current assignment appears.
3 Press the [DIGITAL INPUT] but-
ton repeatedly to select COAX,
DIGITAL INPUT
OPT1, OPT2, or "– – – –" (analog).
Changing the Input Display
If you connect an
recorder, CD recorder, or next generation HDD-compat-
ible component to the TAPE IN/OUT or VIDEO 3 IN
jacks, for
TUNING / PRESET
MASTER VOLUME
setting.
ENTER
This setting can only be changed on the AV receiver.
RETURN SETUP
CLEAR
TAPE TUNER CD
iPod photo: If you're using an iPod photo with the
DS-A1 Remote Interactive Dock, connect the DS-A1's S
VIDEO jack directly to an S-Video input on your TV.
COAX
- - - -
1
OPT 1
- - - -
- - - -
OPT 2
2
Note:
HDD can be selected for the TAPE input selector or
VIDEO 3 input selector, but not both at the same time.
-capable Onkyo MiniDisc
to work properly, you must change this
STANDBY/ON
STANDBY
A SPEAKERS B TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
PHONES
MULTl CH DVD VIDEO 1/VCR VIDEO 2 VIDEO 3 TAPE TUNER
1, 2 1, 2
Press the [TAPE] or [VIDEO 3]
TAPE input selector button so that
"TAPE" or "VIDEO3" appears on
the display.
or
VIDEO 3
Press and hold down the [TAPE]
TAPE or [VIDEO 3] input selector but-
ton (about 3 seconds) to change
the setting.
Repeat this step to select MD, CDR, or
or
HDD.
VIDEO 3
For the TAPE input selector, the setting
changes in this order:
→ →
TAPE MD
For the VIDEO 3 input selector, the set-
ting changes in this order:
→
VIDEO 3 HDD
TUNING / PRESET
MASTER VOLUME
ENTER
RETURN SETUP
CD
→
CDR HDD
35