First Time Setup; Assigning Digital Inputs To Input Sources; Changing The Tape/Md/Cdr Display - Onkyo HT-S780 Instruction Manual

HT-S780_En.book Page 33 Monday, February 28, 2005 2:13 PM

First Time Setup

Assigning Digital Inputs to Input
Sources
STANDBY/ON
STANDBY
A SPEAKERS B TONE + STEREO LISTENING MODE
PHONES
PURE AUDIO MULTl CH DVD VIDEO 1 VIDEO 2 VIDEO 3
VCR
1
To enjoy Dolby Digital and DTS, you must connect your
DVD player to the AV receiver by using a digital audio
connection (coaxial or optical).
With this function, you can assign digital inputs to input
sources. For example, if you connect your DVD player
to DIGITAL IN OPTICAL 1, you'll need to assign that
input (OPT1) to the DVD input source.
You can change the assignments as follows.
Note:
Make sure you also set your digital sources to send out a
digital signals. Please refer to the digital sources' man-
ual.
1 Press the input selector button
for the source that you want to
DVD VIDEO 1 VIDEO 2
assign.
(Digital inputs cannot be assigned to
VCR
VIDEO 3 TAPE TUNER
the TUNER input source.)
CD
2
Press the [DIGITAL INPUT]
button.
DIGITAL INPUT
The current assignment appears.
3
Press the [DIGITAL INPUT] but-
ton repeatedly to select COAX,
DIGITAL INPUT
OPT1, OPT2, OPT3, or "– – – –"
(analog).
By default, the DVD input source is assigned to
[COAX].
2, 3
TUNING / PRESET
MASTER VOLUME
ENTER
RETURN SETUP
DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
VIDEO 3 INPUT
VIDEO L AUDIO R
TAPE TUNER CD

Changing the TAPE/MD/CDR Display

If you connect an -compatible Onkyo MiniDisc
recorder or CD recorder to the TAPE IN/OUT jacks, for
to work properly, you must change this setting.
This setting can only be changed on the AV receiver.
STANDBY/ON
STANDBY
A SPEAKERS B TONE + STEREO LISTENING MODE DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
PHONES
PURE AUDIO MULTl CH DVD VIDEO 1 VIDEO 2 VIDEO 3
VCR
1
Press the [TAPE] input selector
button so that "TAPE" appears
TAPE
on the display.
2 Press and hold down the [TAPE]
input selector button (about 3
TAPE
seconds) to set the display.
Repeat this step to select TAPE, MD, or
CDR.
TUNING / PRESET
MASTER VOLUME
ENTER
RETURN SETUP
CLEAR
VIDEO 3 INPUT
VIDEO L AUDIO R
TAPE TUNER CD
1, 2
33