Page 1
PROFESSIONAL AUDIO SYSTEM SP218 OPERATING MANUAL Ver. SP218-EN-1.1 LSS Advanced Speaker Systems Via On. Longo 53-89024 Polistena (RC) ITALY Tel (39) 966 9321299 – Fax (39) 966 933007 Email: info@lss.it - Internet: www.lss.it...
Page 2
Every precaution has been taken in the preparation of this manual. Nevertheless, LSS assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained in this publication.
LSS produces professional audio products – the result of exceptional engineering and meticulous craftsmanship. This manual is intended for use with LSS loudspeaker. This includes: safety precautions; installation, set-up and operating instruction. Please read this manual plus any accompanying manual and follow all relevant precautions and instructions.
LSS loudspeakers can produce sound levels capable of causing permanent hearing damage from prolonged exposure. The higher the sound level, the less exposure needed to cause such damage CAUTION: This product is energized as long as it is connected to the AC.
44 mm (1,75"). The driver from 25 mm (1") of Mylar on a rotable 90° X 40° ABS horn. SP218 is the ideal product for small and medium Pubs Disco Bar etc The suspension points included in the cabinet offer the possibility of installation both in horizontal and vertical position.
SP218_________________________________________________________________________________ INSTALLATION AND WIRING SP218 speaker can be mounted to the wall using its own bracket or on the floor as monitor. There are two plates provided with the speaker: one of them must be installed when using a mount pole, the other one must be used when using the mounting bracket to fix it.
Page 9
IN is the input connector and must be connected to the amplifier, ‘OUT’ is a LINK OUT and can be connected to other systems. Channel 2 has been linked from In to the out. You can now use the system Operating Manual ver. SP218-EN-1.1 |9...
Warning: If the product is used for business purposes, the following steps to delete it: contact your LSS dealer for information about the product recall. Might be charged for the costs of collection and recycling. Small products (and amounts) might be taken back by your local collection facilities.
Need help?
Do you have a question about the SP218 and is the answer not in the manual?
Questions and answers