Troubleshooting - Blizzard Lighting SkyBox 5 Manual

DMX Values In-Depth (6-Channel Mode)
Ch. Value
1 000 <--> 255
2 000 <--> 255
3 000 <--> 255
4 000 <--> 255
5 000 <--> 255
6 000 <--> 010
011 <--> 255
DMX Values In-Depth (5-Channel Mode)
Ch. Value
1 000 <--> 255
2 000 <--> 255
3 000 <--> 255
4 000 <--> 255
5 000 <--> 255

Troubleshooting

Symptom
Fixture Auto-Shut
Off
No Light Output
Chase Speed Too
Fast/Slow
No Power
Blown Fuse
No Response to
Audio
Fixture Not
Responding /
Responding Er-
raticly
Intermittent
Lamp
If your problem isn't listed, or if problems persist,
please open a support ticket at: www.blizzardlighting.com/support.
SkyBox™ 5 User Manual Rev. C
What It Does
Red Intensity (0% <--> 100%)
Green Intensity (0% <--> 100%)
Blue Intensity (0% <--> 100%)
Amber Intensity (0% <--> 100%)
White Intensity (0% <--> 100%)
No Function
Strobe Speed (1-20Hz)
What It Does
Red Intensity (0% <--> 100%)
Green Intensity (0% <--> 100%)
Blue Intensity (0% <--> 100%)
Amber Intensity (0% <--> 100%)
White Intensity (0% <--> 100%)
Solution
Check the fan in the fixture. If it is stopped or moving slower than
normal, the unit may have shut itself off due to high heat. This is to
protect the fixture from overheating. Clear the fan of obstructions,
or return the unit for service.
Check to ensure fixture is operating under correct mode, IE sound
active/auto/DMX/Etc., if applicable.
Check to ensure proper setup of speed adjustment.
Check fuse, AC cord and circuit for malfunction.
Check AC cord and circuit for damage, verify that moving parts are
not restricted and that unit's ventilation is not obstructed
Verify that the fixture is in "Sound Active" mode.
Adjust Audio Sensitivity, If Applicable.
Make sure all connectors are seated properly and securely.
Use Only DMX Cables and/or check cables for defects
Install a Terminator.
Reset fixture(s).
Check lamp for properly installation.
Relamp, lamp may have reached end of life.
Page 18
© 2016 Blizzard Lighting, LLC