Troubleshooting - Blizzard Lighting EM-Pulse User Manual

DMX Values In-Depth (9-Channel Pixel Mode)
Ch. Value
1 000 <--> 005
006 <--> 255
2 000 <--> 005
006 <--> 255
3 000 <--> 005
006 <--> 255
4 000 <--> 005
006 <--> 255
5 000 <--> 005
006 <--> 255
6 000 <--> 005
006 <--> 255
7 000 <--> 005
006 <--> 255
8 000 <--> 005
006 <--> 255
9 000 <--> 005
006 <--> 255

Troubleshooting

Symptom
Fixture Auto-
Shut Off
No Light Output Check to ensure fixture is operating under correct mode, IE
Chase Speed
Too Fast/Slow
No Power
Blown Fuse
Slow Movement
Fixture Not
Responding /
Responding Er-
ratically
Fixture Moving
On Its Own
If your problem persists or isn't listed, please contact us by
using our online support system: www.blizzardlighting.com/tickets.
EM-Pulse User Manual - Rev. A
What It Does
No Function
Segment 1 Intensity (0% <--> 100%)
No Function
Segment 2 Intensity (0% <--> 100%)
No Function
Segment 3 Intensity (0% <--> 100%)
No Function
Segment 4 Intensity (0% <--> 100%)
No Function
Segment 5 Intensity (0% <--> 100%)
No Function
Segment 6 Intensity (0% <--> 100%)
No Function
Segment 7 Intensity (0% <--> 100%)
No Function
Segment 8 Intensity (0% <--> 100%)
No Function
Segment 9 Intensity (0% <--> 100%)
Solution
If it is stopped or dimmer than normal, the unit may have
shut itself off due to high heat. This is to protect the fixture
from overheating.
sound active/auto/DMX/Etc., if applicable.
Check to ensure proper setup of speed adjustment.
Check fuse, AC cord and circuit for malfunction.
Check AC cord and circuit for damage, verify that moving
parts are not restricted and that unit's ventilation is not
obstructed
Check that speed channels are set appropriately.
Make sure all connectors are seated properly and securely.
Use Only DMX Cables and/or check cables for defects
Install a Terminator.
Reset fixture(s).
Verify proper mode of operation. Is the fixture in "Auto"
mode?
Page 16
(c) 2014 Blizzard Lighting, LLC