Strobe; Manual Color Mixing; Sound Active Mode; Dimming Mode - Blizzard Lighting SkyBox 5 Manual

Strobe (White)
1.) Navigate the menu using the <MENU> button until you reach Strobe.
2.) Use the <UP/DOWN> buttons to select the strobe speed from 00-15.
3.) Press the <ENTER> button to confirm.

Manual Color Mixing:

Mix your own custom colors using the R/G/B/A/W intensity level setting.
1.) Navigate the menu using the <MENU> button until you reach Manual, then press the
<ENTER> button. Then to change the intensity levels of any color, proceed with the following:
Red:
a.) Navigate the menu using the <MENU> button until you reach Red.
b.) Use the <UP/DOWN> buttons to adjust red 000-255. (0% <--> 100%).
c.) Press the <ENTER> button to confirm.
Green:
a.) Navigate the menu using the <MENU> button until you reach Green.
b.) Use the <UP/DOWN> buttons to adjust green 000-255. (0% <--> 100%).
c.) Press the <ENTER> button to confirm.
Blue:
a.) Navigate the menu using the <MENU> button until you reach Blue.
b.) Use the <UP/DOWN> buttons to adjust blue 000-255. (0% <--> 100%).
c.) Press the <ENTER> button to confirm.
Amber:
a.) Navigate the menu using the <MENU> button until you reach Amber.
b.) Use the <UP/DOWN> buttons to adjust amber: 000-255. (0% <--> 100%).
c.) Press the <ENTER> button to confirm.
White:
a.) Navigate the menu using the <MENU> button until you reach White.
b.) Use the <UP/DOWN> buttons to adjust white 000-255. (0% <--> 100%).
c.) Press the <ENTER> button to confirm.

Sound Active Mode

1.) Navigate the menu using the <MENU> button until you reach Sound...
2.) Press the <ENTER> button to confirm.

Dimming Mode

Select from 5 different dimming curve choices. These each allow for different amounts of steps to achieve
smoother (and slower) dimming capabilities.
1.) Navigate the menu using the <MENU> button until you reach Dimmer.
2.) Use the <UP/DOWN> buttons to select from 0-4.
3.) Press the <ENTER> button to confirm.
Mode 0 = 8-bit, 256 dimming steps
Mode 1 = 32-bit, 0-25% intensity range
Mode 2 = 32-bit, 0-50% intensity range
Mode 3 = 32-bit, 0-75% intensity range
Mode 4 = 32-bit, full intensity dimming
Set Wireless Group ID
1.) Navigate the menu using the <MENU> button until you reach RF-ID.
2.) Select the RF-ID 1-7. (See page 9)
3.) Press the <ENTER> button to confirm.
IR Remote Control Mode (remote control sold separately)
1.) Navigate the menu using the <MENU> button until you reach IR MODE.
2.) You are now in IR mode. The fixture will now respond to the IR remote control. (See page 16)

Power Output Mode

1.) Navigate the menu using the <MENU> button until you reach OUT MOD.
2.) Select 0 (High: 100%), 1 (Medium: 75%), or 2 (Battery Saver: 50%) output mode.
3.) Press the <ENTER> button to confirm. (See page 9)
SkyBox™ 5 User Manual Rev. C
Page 15
© 2016 Blizzard Lighting, LLC