Manual Color Adjustment; Dmx Channel Values In-Depth; Troubleshooting - Blizzard Lighting ProPar Seven 3 Manual

NOTE: After making any adjustment, hold the <MENU> button for approximately
3 seconds, otherwise the fixture will return to the correct mode after
DMX Values In-Depth (6-Channel Mode)
Channel
1
2
3
4
5
6
DMX Values In-Depth (3-Channel Mode)
Channel
1
2
3

Troubleshooting

Symptom
Fixture Auto-
Shut Off
Beam is Dim
No Light Output Check to ensure fixture is operating under correct mode, IE
Chase Speed
Too Fast/Slow
No Power
No Response to
Audio
Fixture Not
Responding /
Responding Er-
raticly
ProPAR Seven.3 Manual Rev. B
approximately 10 seconds.
Value
000 <--> 255
000 <--> 255
000 <--> 255
000 <--> 255
000 <--> 255
000 <--> 255
Value
000 <--> 255
000 <--> 255
000 <--> 255
Solution
Check the fan in the fixture. If it is stopped or moving
slower than normal, the unit may have shut itself off due to
high heat. This is to protect the fixture from overheating.
Clear the fan of obstructions, or return the unit for service.
Check optical system and clean excess dust/grime. Also
ensure that the 220V/110V switch is in the correct position,
if applicable.
sound active/auto/DMX/Etc., if applicable. Contact service
for more information.
Check to ensure proper setup of speed adjustment.
Check fuse, AC cord and circuit for malfunction.
Verify that the fixture is in "Sound Active" mode.
Adjust Audio Sensitivity, If Applicable.
Make sure all connectors are seated properly and securely.
Use Only DMX Cables.
Install a Terminator.
Check all cables for defects.
Reset fixture(s).
Page 13
What It Does
Master Dimmer (Slow <--> Fast)
Red Intensity (0% <--> 100%)
Green Intensity (0% <--> 100%)
Blue Intensity (0% <--> 100%)
Built In Programs
Strobe (Slow <--> Fast)
What It Does
Red Intensity (0% <--> 100%)
Green Intensity (0% <--> 100%)
Blue Intensity (0% <--> 100%)
Copyright (c) 2013 Blizzard Lighting, LLC