Connecting Rod Cap; Piston And Connecting Rod - Kubota Z482-E2B Workshop Manual

SM-E2B SERIES, WSM

(5) Piston and Connecting Rod

Connecting Rod Cap

1. Remove the connecting rod caps (1) using a bihexagonal 8 mm
socket.
(When reassembling)
• Align the marks (a) with each other. (Face the marks toward the
injection pump.)
• Apply engine oil to the connecting rod screws and lightly screw it
in by hand, then tighten it to the specified torque.
If the connecting rod screw won't be screwed in smoothly, clean
the threads.
If the connecting rod screw is still hard to screw in, replace it.
Tightening torque Connecting rod screw
(1) Connecting Rod Cap
S-42
DIESEL ENGINE
26.5 to 30.4 N·m
2.7 to 3.1 kgf·m
19.5 to 22.4 ft-lbs
(a) Mark
W10275480
KiSC issued 06, 2006 A