Table of Contents
Advertisement
VDR-D210P / VDR-D220P / VDR-D230P / VDR-D210PC / VDR-D220PC / VDR-D230PC
9. Installation of Front P.C.B.
1) Install the Front P.C.B. with the 3 bosses, and tighten
the 3 Screws (537).
2) (For models with Light)
Connect the F.P.C. to Connector FP6502.
Front P.C.B.
537
Boss
FP6502
Front /Hood Unit
(For models with Light)
Installation of LED Light F.P.C. and LED Light Lens
1) Install the LED Light Lens into the Front/Hood Unit.
2) Install the LED Light F.P.C. with the 2 bosses of the LED
Light Lens.
3) Install the Heat Sink Plate with the 2 Screws (537).
537
Boss
537
Boss
Fig. D9
10. Removal of Side R P.C.B.
1) Remove the 2 Screws (537).
2) Disconnect connector lead from Connectors P6301.
Installation of Side R P.C.B.
Make sure the tab is set into the slot.
Side R P.C.B.
537
Tab
30
537
P6301
Fig. D10
Advertisement
Table of Contents
