Panasonic VDR-D210P Service Manual page 29

8. DVD Drive Frame Unit Caution
Caution
Laser light striking the eye may cause your eyesight
to be lost: For safety, be sure to remove any power
supply (AC adaptor/charger, battery, etc.) from the
DVD video camera/recorder before starting work.
<CSA requirement>
CAUTION: VISIBLE LASER RADIATION DO NOT
STARE INTO THE BEAM OR VIEW DIRECTLY WITH
OPTICAL INSTRUMENTS CLASS 2M
Optical pickup
Fig. D8-1
VDR-D210P / VDR-D220P / VDR-D230P / VDR-D210PC / VDR-D220PC / VDR-D230PC
Removal of DVD Drive Frame Unit & Disc Cover Lock
Unit
1) Remove the 2 Screws (540) and remove the Earth
Plate.
2) Remove the 4 Screws (537) and remove the Heat Sink
Ass'y.
3) Disconnect the F.P.C. from the connector on the DVD
Drive Frame Unit.
4) Remove the DVD Drive Frame Unit from the 2 Pins A.
5) Open the Disc Cover to slide the Lock Lever with a
screwdriver, etc.
6) Remove the 2 Screws (537), and remove the Disc
Cover Lock Unit from the 2 Pins B so as not to damage
the 2 Switches.
Heat Sink Ass'y
537
Earth
Connector
Plate
540
540
Pin A
537
DVD Drive Frame Unit
Disc Cover Lock Unit
29
537
Pin A
537
Switch
Pin B
Switch
537
Pin B
Lock Lever
Slide to eject
Fig. D8-2
537