Toro 30381 Operator's Manual page 29

Figure 50
1. Access covers
25. Install the winter frame floor plate cover to the floor
with the screws previously removed (Figure 51).
Figure 51
1. Floor plate cover
26. Connect the cab pressure and return hoses to the
quick couplers on the rear frame mount (Figure 52).
2. Mounting screws
1. Pressure hose
27. Remove the cap and plug the cab wire harness
connector into the harness on the rear frame mount
(Figure 53).
1. Cab wire harness
connector
28. Start the machine. Run the lift arm up and down
and check for hydraulic leaks. Check the antifreeze
level and replenish as required.
29
Figure 52
2. Return hose
Figure 53
2. Harness connector on the
rear frame mount