Setup; Checking The Tire Pressure; Checking The Engine-Oil Level; Checking The Transaxle-Oil Level - Toro 34215 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
4
Media and Additional Parts
Description
Operator's Manual
Key
1

Checking the Tire Pressure

No Parts Required
Procedure
Front and Rear Tire Air Pressure: 83 to 97 kPa (12 to 14
psi)
1. Check the air pressure in the front and rear tires.
2. If the air pressure in the tires need adjustment, inflate
the tires to 83 to 97 kPa (12 to 14 psi).
2

Checking the Engine-Oil Level

No Parts Required
Procedure
The engine is shipped with oil; check the engine-oil level and,
if necessary, add to the appropriate level. Refer to
the Engine-Oil Level (page 21)
specification.
Description
No parts required
Checking
for instructions and the oil
Qty.
–
Qty.
1 Read before operating the machine.
2 Start the machine.
3
Checking the Transaxle-Oil
Level
No Parts Required
Procedure
Transaxle Oil Type: Toro® HYPR-OIL™ 500 hydraulic oil
or Mobil® 1 15W-50
The Transaxle is shipped with oil; check transaxle oil level in
the oil expansion tank, and if necessary, add to the appropriate
level; refer to Servicing the Transaxle (page 63)
14
Use
Connect the battery.
Use