Table of Contents
Advertisement
Sprayer Controls
Figure 13
1. Sprayer pressure control
2. Tank agitation lever
3. Narrow spray pattern lever 7. Sprayer pump switch
4. Wide spray pattern lever
Sprayer Pressure Control
The sprayer pressure control is located to the left of the spray
pressure gauge
(Figure
13).
•
Rotate the sprayer pressure control clockwise to increase
pressure to the sprayer nozzles
•
Rotate the pressure control counterclockwise to decrease
nozzle pressure.
Tank Agitation Lever
The tank agitation lever is the left most lever located at the
top center of the control console
Setting the tank agitation lever to the On position allows the
sprayer pump to circulate the content in the spray tank in
order to keep the chemical solution mixed.
•
Pull the tank agitation lever rearward to circulate the
content in the spray tank.
•
Push the lever forward to stop to circulating the content
in the spray tank.
Note: Agitation is not meant to be used while spraying.
Shut off the tank agitation lever to ensure proper spray
distribution.
Note: Run the engine speed above idle and run the sprayer
pump for the tank agitation to work effectively.
5. Sprayer wand
6. Sprayer pressure gauge
8. Sprayer wand pressure
control
(Figure
13).
Narrow Spray Pattern Lever
The narrow spray pattern lever is the second lever, located at
the top center of the control console, to the right of the tank
agitation lever
(Figure
•
Pull the narrow spray pattern lever toward you to turn on
the sprayer in a narrow spray pattern (the center nozzle
only).
•
Push the narrow spray pattern lever away from you to
turn off the sprayer.
Wide Spray Pattern Lever
The wide spray pattern lever is the third lever, located at the
top center of the control console, to the right of the narrow
spray control lever
(Figure
•
Pull the wide spray pattern lever toward you to turn on the
sprayer in a wide spray pattern (the right and left nozzles).
•
Push the wide spray pattern lever away from you to turn
off the sprayer.
Sprayer Pressure Gauge
The sprayer pressure gauge is located to the left of the sprayer
pump switch at the control console
Use the pressure gauge to see the fluid pressure in the sprayer
system.
Sprayer Pump Switch
The sprayer pump switch is located to the left of the impeller
On/Off switch
(Figure
Use the sprayer pump switch to start and stop the pump
when spraying or circulating the fluid in the sprayer tank.
•
Push down on the top of the sprayer pump switch to
start the pump.
•
Push down on the bottom of the switch to stop the pump.
Spray Wand Trigger and Trigger Lock
The spray wand trigger and trigger lock are located on the top
side of the spray wand handle
•
To use the spray wand, hold the handle of the wand
squeeze the trigger.
•
To lock the trigger to the On position, Fully squeeze the
trigger against the handle of the spray gun and then rotate
the trigger lock forward with your thumb; to unlock the
trigger lock, rotate the lock toward you.
•
Release the trigger to stop spraying with the wand.
19
13).
13).
(Figure
13).
13).
(Figure 13
and
Figure
14).
Advertisement
Table of Contents
