Table of Contents
Advertisement
1. Handle
3
Installing the Seat
No Parts Required
Procedure
The Groundsmaster 3320 is shipped without the seat
assembly. The Seat, Model 30398 and the Mechanical
Seat Suspension Kit, Model No. 30312 or the Pneumatic
Seat Suspension Kit, Model No. 30313 must be obtained
and installed. Refer to the seat kit for installation
instructions.
Note: An Auxiliary Power Unit Kit, Model No. 30382,
must be obtained and installed before installing a
Pneumatic Suspension Seat Kit to the machine.
Figure 5
2. Hood cable bracket
4
Installing the Seat Belt
Parts needed for this procedure:
2
Seat Belt
2
Bolt
2
Lockwasher
2
Flatwasher
Procedure
Install each end of the seat belt in the holes in the back
of the seat with (2) 7/16 x 1 inch bolts, 7/16 inch
flatwashers and 7/16 lockwashers (Figure 6). Tighten
securely. The latch side of the belt is to be mounted to
the left side of the seat.
1. Seat belt
5
Installing the Manual Tube
Parts needed for this procedure:
1
Manual Tube & Cap
2
R-clamp
Procedure
1. Remove manual tube and R–clamps secured to
the seat plate. Discard the (2) mounting bolts and
flatwashers.
14
Figure 6
Advertisement
Table of Contents
