Installing The Handle To The Hood; Figure - Toro 30343 Operator's Manual

1
Installing the Steering Wheel
Parts needed for this procedure:
1 Steering wheel
1 Cover
Procedure
1. Remove the steering wheel from the shipping skid.
1. Steering wheel
2. Jam nut
3. Dust cover
2. Remove the jam nut and washer from the steering
shaft. Ensure that the foam collar and dust cover
remain on the steering shaft (Figure 3).
3. Slide the steering wheel and washer onto the steering
shaft (Figure 3).
4. Secure the steering wheel to the shaft with the jam
nut. Tighten the jam nut to 20-26 ft-lb.
5. Mount the cover to the steering wheel (Figure 3).

Figure 3

4. Foam collar
5. Cover
6. Washer
2
Installing the Handle to the
Hood
Parts needed for this procedure:
1 Handle
2 Screws
Procedure
1. Remove and discard the (2) screws and nuts securing
the hood cable bracket and to the underside of the
hood (Figure 4).
1. Hood cable bracket
2. Mount the handle and the cable bracket to the hood
with (2) screws (Figure 5).
13
Figure 4