Monitor Menu
The monitor menu allows you to view the following temperatures and running hours:
•
Outdoor temperature highs and lows
•
Room temperature highs and lows
•
Floor temperature highs and lows (requires floor sensor to be installed)
•
Filter Hours = Number of hours since the air filter was last replaced
•
Heat W = Number of hours the heat relay is on
•
Cool Y = Number of hours the cooling relay is on
•
Fan = Number of hours the fan relay is on
To clear the temperature highs and lows or the running hours:
1. Touch the temperature or running hours.
2. Display will show "
3. Touch Enter.
Toolbox Menu
This menu provides advanced-level information.
Access
Change the access level on the thermostat.
Status Info
Displays the current status of the thermostat including any overrides from the tekmarNet
system control. Toggles between "Status Info" and the current status.
•
System Normal = Thermostat is operating normally.
•
For all other thermostat status messages, please see the Installation & Operation
Manual 554_D.
Software Version and Type Number
Display the software "SW" and the "TYPE" number.
A Watts Water Technologies Company
".
11 of 12
© 2015
554_U - 02/15
®