Monitor Menu - Tekmar tekmarNet 553 Installation & Operation Manual

Monitor Menu (1 of 4)
Setting
ROOM AVERAGE
Current room temperature. Displays the average if
there are multiple room sensors.
Access Level: Installer
Conditions: Sensor 1 or 2 is set to ROOM.
FLOOR AVERAGE
Current floor temperature. Displays the average if
there are multiple floor sensors.
Access Level: Installer
Conditions: Sensor 1 or 2 is set to FLOR.
AIR GROUP AVERAGE
Average room temperature of the thermostat and all
air group member thermostats.
Access Level: Installer
Conditions: Setup menu setting Air Group Master
must be set to 1 through 16.
W SUPPLY
First stage heating supply water temperature.
Access Level: Installer
Conditions: W TERM set to HRF1, HRF2, CONV
or COIL.
ROOM LOCAL
The built-in room sensor temperature measurement.
Access Level: Installer
Conditions: Setup menu setting Room Sensor is
set to ON.
SENSOR 1
The temperature measurement from the sensor 1
input wiring terminals.
Access Level: Installer
Conditions: Sensor 1 is set to ROOM, FLOR, COIL
or DUCT.
A Watts Water Technologies Company
Display
Range: -58 to 212°F
(-50.0 to 100.0°C)
Default: Not applicable.
Range: -58 to 212°F
(-50.0 to 100.0°C)
Default: Not applicable.
Range: -58 to 212°F
(-50.0 to 100.0°C)
Default: Not applicable.
Range: -22 to 266°F
(-30.0 to 130.0°C)
Default: Not applicable.
Range: -58 to 212°F
(-50.0 to 100.0°C)
Default: Not applicable.
Range: -58 to 212°F
(-50.0 to 100.0°C)
Default: Not applicable.
18 of 48
© 2013 553_D - 04/13