Advanced Wi-Fi Settings - Motorola TC70 User Manual

Figure 87: Static IP Settings
4 In the IP address text box, enter an IP address for the device.
5 If required, in the Gateway text box, enter a gateway address for the device.
6 If required, in the Network prefix length text box, enter a the prefix length.
7 If required, in the DNS 1 text box, enter a Domain Name System (DNS) address.
8 If required, in the DNS 2 text box, enter a DNS address.
9 Touch Connect.
10 Touch
.

Advanced Wi-Fi Settings

Note: Advanced Wi-Fi settings are for the device not for a specific wireless network.
Use the Advanced settings to configure additional Wi-Fi settings. From the Wi-Fi screen, touch
view the advanced settings.
• General
- Network notification - When enabled, notifies the user when an open network is available.
- Keep Wi-Fi on during sleep - Opens a menu to set whether and when the Wi-Fi radio turns off.
+ Always On - The radio stays on when the device enters suspend mode (default).
+ Only when plugged in - The radio stays on while the device is connected to external power.
+ Never On - The radio turns off when the device enters suspend mode.
- Install Certificates – Touch to install certificates.
- Wi-Fi optimization – Touch to minimize battery usage when Wi-Fi is on (default – disabled)
- MAC address - Displays the Media Access Control (MAC) address of the device when connecting to Wi-Fi
networks.
• Regulatory
- Country selection - Displays the acquired country code if 802.11d is enabled else it displays the currently
selected country code.
• Band and Channel Selection
- Wi-Fi frequency band - Use to select the frequency band. Options: Auto (default), 5 GHz only or 2.4 GHz
only.
- Available channels (2.4 GHz) - Use to select specific channels. Touch to display the Available channels
menu. Select specific channels. Touch OK.
Wireless | 105
> Advanced to