152 | Accessories
Figure 145: Insert Trigger Handle Plate
8 Insert the battery, bottom first, into the battery compartment in the back of the device.
9 Rotate the top of the battery into the battery compartment.
10 Press the battery down into the battery compartment until the battery release latches snap into place.
Inserting the Device into the Trigger Handle
Procedure:
1 Align the back of the Trigger handle with the Trigger Mounting Plate.
Figure 146: Connect Device to Trigger Handle
2 Press the two release latches.
3 Rotate the device down and press down until it snaps into place.