Table of Contents
Advertisement
2.
OSD
LANGUAGE:
H-POSITION:
V-POSITION:
DURATION:
BACKLIGHT:
MEM-RECALL:
3.
Geometry
H-POSITION:
V-POSITION:
CLOCK:
(If the clock setting of your image is not fine-tuned, you may observe periodic
vertical bars of video noise on your image. These bars of noise are usually
adjusted out when an Auto Configuration is performed. If the
Select preferred language for OSD.
(En/Ch/Ger/Fr/Sp/It/Pt/Pl/Ru)
(0-100) Set the horizontal position of the OSD.
(0-100) Set the vertical position of the OSD.
(5-60) Set seconds for the OSD to automatically
close.
Set power level in use by backlight (HIGH/MID/LOW)
Restore all factory defaults.
Set horizontal image position.
Set vertical image position.
Manually adjust clock synchronisation.
14
Advertisement
Table of Contents
