Winch Operation - BOMBARDIER outlander max 650 efi 2006 Operator's Manual

4WD MODE
To deselect the 4WD mode, press the
selector on 2WD.
2WD MODE
When the selector is located on the
2WD, the vehicle is in 2 wheel drive
at all time.

Winch Operation

XT Models
See the ATV WINCH OPERATOR'S
MANUAL. This manual should be kept
in the tool box and remain in the vehi-
cle at all times.
Stopping the Engine
Avoid parking on slope.
Release throttle and completely stop
the vehicle.
Apply the parking brake by using brake
lever lock on brake lever.
Set transmission lever in PARK posi-
tion.
Push the engine stop switch in OFF
position.
Turn key in ignition switch to OFF.
Remove key from ignition switch.
Post-Operation Care
When vehicle is used in salt-water
environment (beach area, launching/
loading boats etc.), rinsing the vehi-
cle with fresh water is necessary to
preserve vehicle and its components.
Metallic parts lubrication is highly rec-
ommended. Use XP-S Lube (P/N 293
600 016) or an equivalent. This must
be performed at the end of each op-
erating day.
When vehicle is operated in muddy
conditions, rinsing the vehicle is rec-
ommended to preserve vehicle and its
components and to keep lights clean.
NOTE: Never use a high pressure
washer to clean the vehicle. USE
LOW PRESSURE ONLY (like a gar-
den hose). High pressure can cause
electrical or mechanical damages.
_____________________
WARNING
93