Using the Mail Send Function
2-4-3
Mail Address
2-4-4
Send Mail
Set up to 2 destination mail addresses.
Item
Mail address 1 Set one of the addresses to which the Ethernet Unit
is to send mail. (Up to two addresses can be set.)
Mail address 2
Each mail address can be up to 50 characters long.
Note: Mail can be sent to multiple addresses by
punctuating the mail address with commas.
For example, the following mail address entry will
send the e-mail to address1@omron.co.jp and
address2@omron.co.jp:
address1@omron.co.jp,address2@omron.co.jp
Set the following settings for send mail conditions 1 to 8.
When a send mail condition or multiple conditions are met, the corresponding
e-mail(s) will be sent automatically.
Contents
Section 2-4
Default
None
21