Remote Mail Command Details
ErrorLogClear (Error Log Clear)
Function
Command Format
Subject: ErrorLogClear
Body: Para1:Unit address
Example)
Specifying a CPU Bus Unit (unit
number 0):
Para1:10
Attached file: None
Response Format
Subject: Re:ErrorLogClear
Body: Response Code:@@@@
Response Status:@@@@
> Para1:Unit address
Attached file: None
Clears the entire error log from the CPU Unit or a specified Special Unit (CPU
Bus Unit or Special I/O Unit).
Notation
Specifies the unit address of the
Unit from which the error log will be
cleared.
Note If this parameter is omitted, a
Response contents
Description
parameter error will occur.
Description
Refer to 3-4-2 Response List.
Refer to 3-4-2 Response List.
Section 3-4
Omission
Cannot be omitted.
55