Omron CS CJ1W-ETN21 Operation Manual page 46

Using the Mail Send Function
Send Mail Condition Settings
Mail Address Specification (Required)
Data Sent by Mail (When Required)
22
Item
Trigger No. Select a number as the trigger condition for
sending mail. Up to eight trigger numbers can be
registered.
Send mail upon Sets whether or not the selected mail trigger is
trigger to be enabled.
Item
Mail address Select whether the e-mail will be sent to destina-
tion mail address 1 or destination mail address
2.
■ Data Sent in E-mail Body
Select whether the user-set ASCII information, Ethernet Unit's error log, and/
or Ethernet Unit's status information will be sent in the e-mail body.
Item
Send user data If this option is selected, user-created data is
sent in the body of the mail.
User-defined When the Send user data Option is selected
mail address (enabled), this address specifies the leading I/O
memory address where the user-set ASCII data
is stored.
Up to 1,024 bytes of data can be stored at this
address and sent in the e-mail. The data will be
sent up to the first null code character (00 Hex)
in the user-set data, so if there is a null code
character in the data the e-mail data will end at
that point.
In addition, the user-set data will be sent as-is
and codes will not be converted.
Send Error Log Selects whether or not the Ethernet Unit's error
information log will be included in the body of the e-mail.
Send status Selects whether or not status information will be
information included in the body of the e-mail.
■ Data Sent in an Attached File
These settings specify whether a file will be attached to the e-mail as well as
the contents of the attached file if one is being attached.
Item
Send file data or This option selects whether or not a file will be
I/O memory attached to the e-mail.
data
Attached file Select one of the following file types.
type
• I/O data (.IOM)
• I/O data (.TXT)
• I/O data (.CSV)
• File data (any file in file memory)
IO memory data If an I/O data file (.IOM, .TXT, or .CSV) is
selected as the attached file type, this setting
specifies the leading address where the data is
stored and the number of words of data that the
Ethernet Unit will convert to a file.
Contents
Contents
Contents
Contents
Section 2-4
Default
None
Not selected
Default
Address 1
Default
Not selected
Area: CIO
Address: 0
Not selected
Not selected
Default
Not selected
File data
Area: CIO
Address: 0
Size: 1