Omron CS CJ1W-ETN21 Operation Manual page 11

Manual Model
number
W394 CS1G/H-CPU@@H
CS1G/H-CPU-@@V1
CJ1G/H-CPU@@H
CJ1G-CPU@@
W340 CS1G/H-CPU@@H
CS1G/H-CPU-@@V1
CJ1G/H-CPU@@H
CJ1G-CPU@@
W414 WS02-CX-@@JV3
W341 CQM1H-PRO01
CQM1-PRO01
C200H-PRO27 +
CS1W-KS001
W336 CS1W-SCB21/41
CS1W-SCU21
CJ1W-SCU41
!WARNING
Failure to read and understand the information provided in this manual may result in per-
sonal injury or death, damage to the product, or product failure. Please read each section
in its entirety and be sure you understand the information provided in the section and
related sections before attempting any of the procedures or operations given.
Name
Programmable Con- Describes programming, tasks, file memory, and other
trollers Program- functions for the CS-series and CJ-series PLCs.
ming Manual
Use together with the Programmable Controllers Opera-
tion Manual (W339 for CS-series PLCs and W393 for CJ-
series PLCs).
Programmable Con- Describes the ladder diagram programming instructions
trollers Instructions supported by CS-series and CJ-series PCs. Use together
Reference Manual with the Programmable Controllers Operation Manual
(W339 for CS-series PLCs and W393 for CJ-series
PLCs), and Programmable Controllers Programming
Manual (W394).
CX-Programmer Provides information on how to use the CX-Programmer,
@ a Windows-based programming device, and CX-Net, a
Ver.3. Operation
Windows-based network configuration tool.
Manual
Use together with the Programmable Controllers Opera-
tion Manual (W339 for CS-series PLCs and W393 for CJ-
series PLCs), Programmable Controllers Programming
Manual (W394) and the Programmable Controllers
Instructions Reference Manual (W340) to perform pro-
gramming.
Programming Con- Provides information on how to operate the Programming
soles Operation Console.
Manual
Use together with the Programmable Controllers Opera-
tion Manual (W339 for CS-series PLCs and W393 for CJ-
series PLCs), Programmable Controllers Programming
Manual (W394) and the Programmable Controllers
Instructions Reference Manual (W340) to perform pro-
gramming.
Serial Communica- Accessing the PLC connected to the CX-Programmer via
tions Boards and Ethernet or the host computer or other device connected
Serial Communica- to the Serial Communications Board or Unit.
tions Units Operation
Describes the use of Serial Communications Units and
Manual
Boards, including details on hardware, software, and
standard system protocols.
Contents
xiii