Dell 2150cn User Manual page 66

7 Press
8 Ensure that the message Please wait Wireless Setting is
displayed, and start the WPS-PBC on the wireless LAN access point
(Registrar), within two minutes of the step 7 operation.
NOTE:
manual supplied with the wireless LAN access point.
9 When the WPS operation is successful and the printer is rebooted, wireless
LAN connection setting is completed.
Operator Panel
1 Press the
2 Press
button.
3 Press
button.
4 Press
(Set) button.
5 Ensure that Manual Setup is displayed, and then press the
button.
6 Enter the SSID, and then press the
7 Select the network mode from Infrastructure and Ad-hoc
depending on your environment.
When you select Infrastructure, proceed to step 8.
When you select Ad-hoc, proceed to step 9.
8 Select the encryption type from No Security, WEP (64Bit), and WEP
(128Bit).
When you do not set security for your wireless network:
Ensure that No Security is displayed, and then press the
a
button.
To use 64 bit or 128 bit WEP encryption:
Press
a
and then press the
Enter the WEP key, and then press the
b
64
Installing Optional Accessories
Downloaded from ManualsPrinter.com Manuals
button until Start appears, and then press the
For WPS operation on the wireless LAN access point, refer to the
(Menu) button.
button until Admin Menu appears, and then press the
button until Network appears, and then press the
button until Wireless Setup appears, and then press the
button until WEP (64Bit) or WEP (128Bit) appears,
(Set) button.
(Set) button.
(Set) button.
(Set) button.
(Set)
(Set)
(Set)
(Set)