Restart printer to apply new settings
*1
This item is available only when Auto Registration Adjustment is set to Off.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The method for charging the photo conductor varies with barometric pressure.
Adjustments are performed by specifying the altitude of the location where the
printer is being used.
Values:
Adjust Altitude
Apply New Settings
Restart printer to apply new settings Click this button to restart the printer and apply
Reset Defaults
Purpose:
To initialize wired network data stored in non-volatile memory (NVM). After
executing this function and rebooting the printer, all wired network settings are
reset to their default values.
Values:
System Section
Non-Dell Toner
NOTICE:
The warranty does not cover damages caused by using non-Dell toner cartridges.
272
Understanding the Tool Box Menus
Downloaded from ManualsPrinter.com Manuals
*
0 meter
1000 meters
2000 meters
3000 meters
Initializes the system parameters.
Using a non-Dell toner cartridge may severely damage your printer.
Click this button to restart the
printer and apply the changes.
Sets the altitude of the location where the
printer is installed.
After you change the settings, click this button
to apply the changes.
the changes.