Color
Prints in the color mode.
Network
Use the Network menu to change the printer settings affecting jobs sent to the
printer through the wired or wireless network.
NOTE:
Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The
change becomes effective after the printer is turned off and then on again.
Values:
*
Auto
10BASE-T Half
10BASE-T Full
100BASE-TX Half
100BASE-TX Full
1000BASE-T Full
Wireless Status
NOTE:
using the wireless network.
Purpose:
To confirm the wireless communication status.
Values:
Connection
Downloaded from ManualsPrinter.com Manuals
Values marked by an asterisk (*) are the factory default menu settings.
Detects the Ethernet settings automatically.
Uses 10BASE-T Half-duplex.
Uses 10BASE-T Full-duplex.
Uses 100BASE-TX Half-duplex.
Uses 100BASE-TX Full-duplex.
Uses 1000BASE-T Full-duplex.
Wireless Status feature is available only when the printer is connected
Good
Acceptable
Low
No Reception
Understanding the Printer Menus
293