Dell 2150cn User Manual page 197

Trap
Notification 1-4
*1
The default value can be changed by using Dell Printer Configuration Web Tool.
SNMP v3
Purpose:
To edit the detailed settings of SNMP v3 protocol. To enter this page, click Edit
SNMP v3 Properties in the SNMP page.
Values:
Downloaded from ManualsPrinter.com Manuals
Trap Address Select the check boxes to notify trap occurrence. In
Type this case, specify the IP address and IP socket in the
following format:
Trap Address
IPv4
Port Number
Specify the IP address and IP socket in the
Notify
nnn.nnn.nnn.nnn:mmmmm format. Each section of
"nnn" is a variable value between 0 and 255. Note
that values 127 and 224-254 are not valid for the
first three-digits only. IP socket mmmmm is a
variable value between 0 and 65,535.
IPv6
Specify the IP address and IP socket in the
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmm
mm format. Each section of "xxxx" is a
hexadecimal variable value between 0 and ffff. IP
socket mmmmm is a variable value between 0 and
65,535.
Authenticate Select the check box to notify Authenticate Error
Error Trap Trap.
Dell Printer Configuration Web Tool
195