Arctic Cat 500 Sno Pro Operator's/Performance Manual page 89

Axle Nut Spanner Wrench
p/n: 0644-454
Usage: Adjust track alignment/tension (2005 440 Sno
Pro).
Axle Nut Spanner Wrench
p/n: 0644-558
Usage: Adjust track alignment/tension (2010 500 Sno
Pro and 600 Sno Pro).
Rear Suspension Spring Tool
p/n: 0144-311
Usage: Install/remove rear suspension springs.
Hex Bits (1/4 in. Hex Drive)
p/n: 0644-317 (5 mm)
p/n: 0644-316 (6 mm)
Usage: With Quick-Disconnect Coupler (p/n 0644-308),
remove and install bolts and screws.
0644-454
Insert Holder (5/16 in.)
p/n: 0644-315
Usage: With Torx Bit Insert (p/n 0644-314), remove and
install torx-head screws.
0644-558
Phillips-Head Bits (1/4 in. Hex Drive)
p/n: 0644-319 (#2)
p/n: 0644-318 (#3)
Usage: With Quick-Disconnect Coupler (p/n 0644-308),
remove and install Phillips-head screws.
0144-311
0644-316
0644-315
0644-318
83