Arctic Cat 500 Sno Pro Operator's/Performance Manual page 87

Track Stud Hole Drill (7 mm)
p/n: 1639-629
Usage: Drill 7 mm hole through rubber tracks for install-
ing studs.
Bellcrank Centering Tool
p/n: 0644-541
Usage: Center the steering bellcranks to properly align
the steering on the 2008 and newer 600 Sno Pro and
2010 500 Sno Pro.
Idler Wheel Puller Kit
p/n: 0644-122 (Complete Kit - 6 in.)
p/n: 0644-400 (Complete Kit - 8 in.)
p/n: 0644-114 (A. Handle - 6 in.)
p/n: 0644-401 (A. Handle - 8 in.)
p/n: 0644-111 (B. Insertion Tool)
p/n: 0644-120 (C. Pivot Plate)
p/n: 0644-118 (D. Adapter Plate - Smaller I.D.)
p/n: 0644-538 (D. Adapter Plate - Larger I.D.)
p/n: 0623-310 (E. Cap Screw)
p/n: 0644-119 (F. Puller Bolt) - 6 in. Kit
p/n: 0644-432 (F. Puller Bolt) - 8 in. Kit
Usage: Remove/install skid frame idler wheels.
1639-629
Floating Piston Location Gauge
p/n: 0644-350
Usage: Precisely locate and measure floating piston
depth without use of a calipers.
0644-541
0644-122
0644-350
81