Arctic Cat 500 Sno Pro Operator's/Performance Manual page 86

Drive Clutch Spanner Wrench
p/n: 0644-136
Usage: Hold Comet and Arctic round-shaft drive clutch in
place during removal and installation.
Driven Pulley Compressor Tool
p/n: 0644-444
p/n: 0644-439 (A. Compressor Assembly Only)
p/n: 0643-095 (B. Disc Only)
Usage: Disassemble/assemble Arctic ACT and Team
Industries roller driven pulleys.
80
Spider Removal Kit
p/n: 0644-449 (Complete Kit)
p/n: 0744-037 (Handle)
p/n: 0744-036 (Removal Tool)
p/n: 0644-380 (Clutch Holder - 33 mm)
p/n: 0744-035 (Clutch Holder - 30 mm)
p/n: 0644-138 (Thin Wall Deep Socket - 1 7/16 in.)
Usage: Disassemble/assemble/remove spider on Arctic
drive clutches.
0644-136
Track Clip Installation Tool
p/n: 0644-194
Usage: Install track clips on Camoplast and Yokohama
rubber tracks.
0644-444
0644-449
0644-194