Installing Software; Installing Dv Media Pro 1.0; 安装程序; 安装 Dv Media Pro 1.0 - Samsung VP-X205L Owner's Instruction Book

Hide thumbs Also See for VP-X205L:
Table of Contents

Advertisement

ENGLISH
Miscellaneous Information :
Installing Software

Installing DV Media Pro 1.0

You need to install DV Media Pro 1.0 to play back recorded movie files or the
transferred data from Sports Camcorder with the USB cable on your PC.
Before your start!
◆ Turn on your PC. Exit all other applications running.
◆ Insert the provided CD into the CD-ROM drive.
The setup screen appears automatically soon after the CD was inserted. If
the setup screen does not appear, click on "Start" on the bottom left corner
and select "Run" to display a dialog. Type "D:\autorun.exe" and then press
ENTER, if your CD-ROM drive is mapped to "D:Drive".
Installing Driver - DV Driver and DirectX 9.0
◆ DV Driver is a software driver that is required to support establishing
connection to a PC.
(If it is not installed, some functions will not be supported.)
1. Click on "DV Driver" on the Setup screen.
◆ Driver software required is installed automatically.
Following drivers will be installed:
-
USB Removable disk driver (Windows 98 SE only)
-
USB PC-CAMERA driver
2. Click on <Confirm> to finish driver installation.
◆ Windows 98 SE users need to restart the PC.
3. If the "DirectX 9.0" is not installed, it is installed automatically after
setting "DV Driver".
◆ After installing DirectX 9.0, PC needs to be restarted.
◆ If DirectX 9.0 is installed already, there is no need to restart the PC.
Application Installation - Video Codec
◆ Click on "Video Codec" on the Setup screen.
Video Codec is required to play movie files recorded by this Sports Camcorder
on a PC.
[ Note ]
✤ If a message saying "Digital Signature not found" or something similar
appears, ignore the message and continue with the installation.
124
124
其它信息 : 安装程序
安装 DV Media Pro 1.0
你必须安装 DV Media Pro 1.0 才能在计算机上播放摄录一体机所录
制的视频文件或通过USB电缆传输数据。
在你开始之前!
◆ 启动计算机。退出所有的应用程序。
◆ 插入提供的 CD 到 CD-ROM 驱动器。
CD 插入以后安装界面将自动出现。 如果安装界面不出现, 请点击
计算机屏幕左下角的"开始"按钮,然后选择"Run"。
如果显示"运行"窗口,请输入"D:\autorun.exe"(如果CD-ROM
驱动器设置为"D:Drive")然后按下 ENTER键。
安装驱动 - DV Driver 和 DirectX 9.0
◆ DV Driver是支持设备与PC建立连接的必备的驱动程序。
(如果不安装, 一些功能将不被支持。)
1. 在安装界面中点击"DV Driver"。
◆ 必备的驱动程序将被自动安装。
以下程序将被安装:
-
USB 可移除磁盘驱动程序 (仅限于Windows 98 SE )
-
USB PC-摄像机 驱动程序
2. 点击 <确认> 完成驱动安装。
◆ Windows 98 SE 用户需要重新启动 PC。
3. 如果没有安装过"DirectX 9.0",安装 "DV Driver"后它将自动安装。
◆ 安装DirectX 9.0后, PC 需要重新启动。
◆ 如果已经安装过DirectX 9.0, 不必重新启动 PC。
应用程序安装 - Video Codec
◆ 点击安装界面中的"Video Codec"(视频解码器)。
视频解码器是在PC上播放摄像机拍摄的视频文件所必需的。
[ 注意 ]
✤ 如果出现信息提示"Digital Signature not found"或者类似的
信息提示, 请忽略此信息继续安装。

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vp-x220lVp-x210l

Table of Contents