Checking The Rear Hub Rubber Dampers - KTM 690 Duke Owner's Manual

13 WHEELS, TIRES
13.5

Checking the rear hub rubber dampers

Info
The engine power is transmitted from the rear sprocket to the rear wheel via 6 rubber dampers. They eventually wear out during
operation. If the rubber dampers are not changed in time, the rear sprocket carrier and the rear hub will be damaged.
Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
–
Remove the rear wheel.
Main work
–
Check bearing
» If the bearing is damaged or worn:
–
Replace the bearings.
–
Check rubber dampers
» If the rubber dampers of the rear hub are damaged or worn:
–
Change all rubber dampers in the rear hub.
602568-10
–
Lay the rear wheel on a workbench with the rear sprocket facing upwards and insert the
wheel spindle in the hub.
–
To check play
hand.
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel
602569-10
( p. 96)

.

of the rear hub for damage and wear.

, hold the rear wheel tight and try to rotate the rear sprocket with your
p. 68)
≤ 5 mm (≤ 0.2 in)
100